Description

AiM Mychron 6 2T Kart Data Logger System – AIM Mychron 6 Kart Data Logger System, with Exhaust Gas Temperature Sensor and M10 Water Tempature Sensor, 2 temperature sensor inputs

AiM MyChron6 2T has a 25Hz GPS-module, higher processing power and a new WiFi-module, making data Transfer much faster than with the MyChron 5s. It has a high-resolution graphical display for the indication of rpm, speed, lap times, gear, temperature (one or two with the MC6 2T), satellite reception and the data from the connected expansions as the lambda or MC-Expansion.

It is possible to configure several display pages free and to select them over the 4 buttons. The display-illumination can be set in 7 different colours and the brightness is controlled by a light-sensor.

The Speed is gathered over the integrated 25Hz GPS-module, indicated on the display and can later with further GPS-channels, e.g. driven line, acceleration… be analyzed on the PC. The Lithium battery supplies the MyChron6 2T twenty hours with power. It also can be supplied by an external battery supply Lead.

MyChron6 2T has two in seven various colours configurable Alarm-LEDs and 5 Shift-LEDs. Both Alarm LEDs can be assigned to every arbitrary measurement and shift-LEDs can be set sequentially, in full group and gear-selective. Over the WiFi / USB-C Connection the configurations can be transferred, the data downloaded or the measurements online checked.

All sensors and cables from the MyChron4, MyChron5, as also MyChron- Expansion, Lambda-system and SmartyCam can also be used on the MyChron6 2T.

Additional information